Air Cooler After Cooler
The Air Cooler – After Cooler is used during cable blowing operations when the air temperature exceeds 20°C or when the compressor has no built-in cooling system.
Description
Air Cooler After Cooler
The Cooler is used during cable blowing operations when the air temperature exceeds 20°C or when the compressor has no built-in cooling system.
This unit works with compressed air from the compressor. The air motor drives a fan that cools the air before it reaches the cable blowing machine and the duct. By lowering the air temperature, it helps reduce friction and heat damage inside the duct, improving the cable blowing distance and efficiency.
The Air Cooler also removes moisture from compressed air, ensuring cleaner and drier airflow. The fan can be easily started or stopped with a manual control handle.
Technicial Specifications
• Dimensions: 74 × 45 × 52 cm
• Weight: 40 kg
• Operating Pressure: 6 bar
• Air Consumption: 0.2 m³/min
Reviews (0)
About brand
SKYFIBERTECH
Skyfibertech is Allame Makina’s brand dedicated to advanced fiber optic cable blowing technology. Built with precision and durability, our machines deliver maximum efficiency in fiber installation projects. From air blowing machines to cable blowing accessories and testing equipment, Skyfibertech provides a complete range of solutions. Trusted worldwide, it simplifies and accelerates fiber network construction with powerful performance, easy operation, and long-lasting reliability.
Related products
Cable Fleeter
Cable Fleeter is a device created for the purpose of faster, safer and cleaner cable handling. It can effectively clump cords and guiding wires during in stalling, and doesn’t be afraid of mud or dust sticking rust and light weight. This ensures your cables are neat and protected all throughout the laying process.
Cable Jetting Parachute
The Cable Jetting Parachute is a must-have for professional and easy fiber cable installations. It applies air pressure to the cable so that the friction between the inside of the duct and the outside is minimized to prevent any possible damage to or bending of the guide bearings with enhanced blowing distance.
Fiber Cable Puller Master
The Fiber Cable Puller Master To facilitate the installation of fiber optic cable made easier, faster and safer. It is use to pull fiber cables thru conduit or ducts with minimum strain or damage.
Fiber that’s hand-pulled can break, or lose its signal. This thing puts the perfect pressure and no harm to the cables when stripping. It will provide a smooth uninterrupted flow even over long lengths.
Hydraulic Power Unit
The Hydraulic Power Unit is a dependable, portable source of hydraulic power for many applications. It is capable of delivering reliable, efficient power for underground mining equipment as well as for tunneling, industrial construction and quarry work. Powered by a 9 Hp Honda gasoline engine, this unit is perfect for sustained use in construction, industrial projects or while the emergency break down due to volume.
Y-Connector for Microduct
The Y-Connector is designed to make better use of ducts that already contain a cable or microduct. It helps place an extra cable or microduct into the same duct by using air-assisted jetting or floating methods.
It can be used with cables from Ø 4 mm to Ø 16 mm and ducts with an outer diameter from 7 mm to 20 mm.
One side of the Y-Connector is attached to the cable blowing machine. This connection allows the second cable to be guided safely into the duct without removing the existing line.
Reviews
There are no reviews yet.